|
|
|
National Stock Number:
5310-01-137-5497
Federal Supply Class:
5310
National Item Identification Number:
011375497
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 13226E1613 | 97403 | CECOM LR CENTER |
|
Techincal Specification:
| THREAD SERIES | UNEF | | NOMINAL THREAD SIZE | 0.625 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 2B | | THREAD PITCH DIAMETERS | 0.5979 TO 0.6031 INCHES | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 1117 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE J403H ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.118 INCHES NOMINAL | | BOSS DIAMETER | 0.778 INCHES NOMINAL | | BOSS THICKNESS | 0.100 INCHES NOMINAL | | NUT WIDTH ACROSS FLATS | 0.880 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE | HEXAGONAL NUT |
|
|