|
|
|
National Stock Number:
5310-01-133-4876
Federal Supply Class:
5310
National Item Identification Number:
011334876
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| MS14177-9 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OR | | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND | | 43.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | HOLE DIAMETER | 0.564 INCHES MINIMUM AND | | 0.568 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.148 INCHES MINIMUM AND | | 1.158 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.153 INCHES MINIMUM AND | | 0.167 INCHES MAXIMUM | | TOP RECESS DIAMETER | 0.681 INCHES MINIMUM AND | | 0.691 INCHES MAXIMUM | | BOTTOM RECESS DIAMETER | 0.681 INCHES MINIMUM AND | | 0.691 INCHES MAXIMUM | | BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL | | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS14177-9 |
|
|