|
|
|
National Stock Number:
5310-01-120-2954
Federal Supply Class:
5310
National Item Identification Number:
011202954
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10T00792-0100 | 01425 | LOUIS ALLIS CO THE THIS COMPANY HAS GONE BANKRUPT AND HAS BEEN PURCHASED BY 3 COMPANIES | | 10T00792-0100 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 15S00754-1000 ITEM 66 | 01425 | LOUIS ALLIS CO THE THIS COMPANY HAS GONE BANKRUPT AND HAS BEEN PURCHASED BY 3 COMPANIES |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 4.500 INCHES MINIMUM AND 4.530 INCHES MAXIMUM | | OVERALL DIAMETER | 5.620 INCHES NOMINAL | | MATERIAL | STEEL COMP 1015 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
|