|
|
|
National Stock Number:
5310-01-119-3285
Federal Supply Class:
5310
National Item Identification Number:
011193285
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10635-00 | 55231 | DUPONT SPECIALTY PRODUCTS USA, LLC | | 9206M79 | 07482 | GENERAL ELECTRIC COMPANY | | 9206M79P03 | 00986 | CHROMALLOY GAS TURBINE LLC | | 9206M79P03 | 07482 | GENERAL ELECTRIC COMPANY | | 9206M79P11 | 07482 | GENERAL ELECTRIC COMPANY | | 9206M79P17 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| MATERIAL | PLASTIC OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.680 INCHES MINIMUM AND | | 0.685 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND W/FLATS | | OVERALL DIAMETER | 1.183 INCHES MINIMUM AND | | 1.187 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.035 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM |
|
|