|
|
|
National Stock Number:
5310-01-119-2004
Federal Supply Class:
5310
National Item Identification Number:
011192004
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1965947 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1965947 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.886 INCHES MINIMUM AND 0.896 INCHES MAXIMUM | | OVERALL DIAMETER | 1.720 INCHES NOMINAL | | MATERIAL | STEEL COMP 1010 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PURCHASE DESCRIPTION IDENTIFICATION | 16764-M-264 | | SPECIAL FEATURES | USED ON AVCO STARTER 1114657 FOR ENGINE X-50280;HEAT TREATED PER MFR. SPEC. P-1500,CODE 12B155X;WHEELABRATE PER MFR. SPEC. P-33-N | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | P-42-B MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | THICKNESS | 0.180 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
|
|