|
|
|
National Stock Number:
5310-01-118-2482
Federal Supply Class:
5310
National Item Identification Number:
011182482
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 10109320 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 2793569-101 | 92003 | PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | ALUMINUM ALLOY 6061 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,TEMPER T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PS 13201,TY 2,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | SLEEVE | | NUT DIAMETER | 0.875 INCHES MINIMUM AND | | 0.880 INCHES MAXIMUM | | NUT LENGTH | 0.655 INCHES MINIMUM AND | | 0.665 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 2 DRILLED | | DRILLED HOLE DIAMETER | 0.187 INCHES MINIMUM AND | | 0.193 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE | ROUND NUT | | SPECIAL FEATURES | 2 HOLES SPACED 180 DEGREES APART 0.101 IN. MIN AND 0.107 IN. MAX DIAMETER AND 0.050 IN. MIN AND 0.054 IN. MAX DEEP,SLOT ACROSS FACE 0.060 IN. WIDE AND 0.015 IN. MIN AND 0.025 IN. MAX DEEP | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 92003 | | DESIGN CONTROL REFERENCE | 2793569-101 |
|
|