|
|
|
National Stock Number:
5310-01-118-1490
Federal Supply Class:
5310
National Item Identification Number:
011181490
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 10109318 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 409B200-1 | 17472 | EATON AEROSPACE LLC | | 409B200-1 | 72121 | EATON MOTOR SITE |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.500 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232,TY M,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | FLANGE THICKNESS | 0.220 INCHES NOMINAL | | NUT DIAMETER | 1.000 INCHES NOMINAL | | NUT THICKNESS | 0.380 INCHES NOMINAL | | UNDERCUT THICKNESS | 0.040 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | CONFIGURATION F | | HOLE TYPE AND QUANTITY | 8 DRILLED | | DRILLED HOLE DIAMETER | 0.125 INCHES NOMINAL | | SPECIAL FEATURES | 4 HOLES 0.062 INCHES NOM DRILLED IN FACE,2 SLOTS 0.047 INCHES NOM WIDE AND 0.045 INCHES NOM DEEP 0.050 INCHES NOM BELOW FACE OF NUT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 17472 | | DESIGN CONTROL REFERENCE | 409B200-1 |
|
|