|
|
|
National Stock Number:
5310-01-117-9750
Federal Supply Class:
5310
National Item Identification Number:
011179750
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 10109316 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 281928 | 0KDP7 | KIDDE-FENWAL, LLC | | 281928 | 96487 | VALCOR ENGINEERING CORPORATION |
|
Techincal Specification:
| MANUFACTURERS CODE | 96487 | | DESIGN CONTROL REFERENCE | 281928 | | THREAD SERIES | UNJEF | | NOMINAL THREAD SIZE | 0.625 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-46850 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074,CL 1,GRADE C MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 52.0 ROCKWELL C MINIMUM AND | | 55.0 ROCKWELL C MAXIMUM | | THREAD LENGTH | 0.490 INCHES NOMINAL OVERALL | | FLANGE DIAMETER | 1.054 INCHES MINIMUM AND | | 1.058 INCHES MAXIMUM | | FLANGE THICKNESS | 0.603 INCHES MINIMUM AND | | 0.607 INCHES MAXIMUM | | NUT DIAMETER | 0.786 INCHES MINIMUM AND | | 0.790 INCHES MAXIMUM | | NUT LENGTH | 0.175 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | CONFIGURATION F | | HOLE TYPE AND QUANTITY | 4 DRILLED | | DRILLED HOLE DIAMETER | 0.095 INCHES MINIMUM AND | | 0.097 INCHES MAXIMUM | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL FLANGE | | CROSS-SECTIONAL SHAPE | ROUND BOSS | | ROUND FLANGE | | THE MANUFACTURERS DATA | |
|
|