5310-01-114-7974, WASHER,FLAT

National Stock Number:
5310-01-114-7974

Federal Supply Class:
5310

National Item Identification Number:
011147974

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

AN960XC1816	88044	AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
FF-W-92	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
NAS1149C1890B	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

MATERIAL	STEEL COMP 301 OR
	STEEL COMP 302 OR
	STEEL COMP 304 OR
	STEEL COMP 316 OR
	STEEL COMP 321 OR
	STEEL COMP 347 OR
	STEEL COMP 348 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR
	MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OR
	MIL-S-5059 MIL SPEC 3RD MATERIAL RESPONSE OR
	MIL-S-5059 MIL SPEC 4TH MATERIAL RESPONSE OR
	MIL-S-6721 MIL SPEC 5TH MATERIAL RESPONSE OR
	MIL-S-6721 MIL SPEC 6TH MATERIAL RESPONSE OR
	MIL-S-6721 MIL SPEC 7TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	OXIDE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER HOLE SHAPE STYLE	ROUND
HOLE DIAMETER	1.130 INCHES MINIMUM AND
	1.150 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE	ROUND
OVERALL DIAMETER	1.870 INCHES MINIMUM AND
	1.895 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
THICKNESS	0.080 INCHES MINIMUM AND
	0.100 INCHES MAXIMUM
COLOR	BLACK OVERALL
NONDEFINITIVE SPEC/STD DATA	A TYPE AND
	1 GRADE AND
	B CLASS
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	81348
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	FF-W-92

Click here to Register for Free 30-day Trial