|
|
|
National Stock Number:
5310-01-114-5822
Federal Supply Class:
5310
National Item Identification Number:
011145822
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 300-4684422ITEM6 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 87774-3603ITEM6 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.000 INCHES MINIMUM AND 1.005 INCHES MAXIMUM | | INSIDE LEFT CORNER CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-741 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | MATERIAL | STEEL OVERALL | | OUTSIDE LEFT CORNER CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | OVERALL DIAMETER | 1.625 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE FINISH | 63.0 MICROINCHES INNER | | SURFACE FINISH | 63.0 MICROINCHES TOP | | THICKNESS | 0.260 INCHES NOMINAL |
|
|