|
|
|
National Stock Number:
5310-01-111-9451
Federal Supply Class:
5310
National Item Identification Number:
011119451
Description:
WASHER,SHOULDERED AND RECESSED
Detail:
A washer, round in shape, having a centrally located hole. One bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. Either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use BEARING, SLEEVE; BUSHING, SLEEVE; or SPACER, SLEEVE. Excludes INSULATOR, WASHER and thrust type washers.
|
Manufacturer Information:
| 5428361 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| HOLE DIAMETER | 0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.560 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/6 TEMPER H321 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/7 TEMPER H32 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-200/5 TEMPER H111 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.190 INCHES NOMINAL | | MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 OVERALL | | RECESS ANGLE | 40.0 DEGREES NOMINAL | | RECESS DIAMETER | 1.051 INCHES NOMINAL | | SHOULDER DIAMETER | 1.376 INCHES MINIMUM AND 1.378 INCHES MAXIMUM | | SHOULDER HEIGHT | 0.060 INCHES NOMINAL | | STYLE DESIGNATOR | SHOULDERED AND RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL |
|
|