| BEARING SURFACE FINISH | 125.0 MICROINCHES |
| COUNTERBORE DIAMETER | 1.055 INCHES MINIMUM AND 1.065 INCHES MAXIMUM NUT |
| HARDNESS RATING | 80.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| OVERALL HEIGHT | 1.018 INCHES MINIMUM AND 1.058 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD ALL MATERIAL RESPONSES NUT |
| MATERIAL | STEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 NUT |
| NOMINAL THREAD SIZE | 0.875 INCHES |
| NUT COUNTERBORE DEPTH | 0.475 INCHES MINIMUM AND 0.495 INCHES MAXIMUM NUT |
| NUT STYLE | FLAT WITH TURNED BACK EDGE |
| WASHER OUTSIDE DIAMETER | 1.465 INCHES MINIMUM AND 1.495 INCHES MAXIMUM |
| WIDTH ACROSS FLATS | 1.239 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE WASHER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES NUT |
| SURFACE TREATMENT | CADMIUM AND CHROMATE NUT |
| SURFACE TREATMENT | PASSIVATE WASHER |
| TEMP RATING | 450.0 FAHRENHEIT MAXIMUM |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 14 |
| THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |