|
|
|
National Stock Number:
5310-01-106-2382
Federal Supply Class:
5310
National Item Identification Number:
011062382
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 571823-1 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.027 INCHES MINIMUM AND 0.034 INCHES MAXIMUM | | COUNTERBORE DIAMETER | 0.620 INCHES MINIMUM AND 0.625 INCHES MAXIMUM NUT | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE DIAMETER | 0.730 INCHES MINIMUM AND 0.735 INCHES MAXIMUM | | FLANGE THICKNESS | 0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 16 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 630 OVERALL | | NOMINAL THREAD SIZE | 0.438 INCHES | | NUT COUNTERBORE DEPTH | 0.060 INCHES MINIMUM AND 0.100 INCHES MAXIMUM NUT | | NUT DIAMETER | 0.617 INCHES MINIMUM AND 0.627 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
|
|