|
|
National Stock Number: 5310-01-105-7236
Federal Supply Class: 5310
National Item Identification Number: 011057236
Description: WASHER,FLAT
Detail: A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
588941-101 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
CENTER HOLE SHAPE STYLE | ROUND | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | HARDNESS RATING | 302.0 VICKERS OR FIRTH DIAMOND PYRAMID MINIMUM AND 372.0 VICKERS OR FIRTH DIAMOND PYRAMID MAXIMUM | HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.133 INCHES MAXIMUM | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5612 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | PERIPHERAL SHAPE STYLE | ROUND | MATERIAL | STEEL COMP 410 OVERALL | OVERALL DIAMETER | 0.260 INCHES MINIMUM AND 0.280 INCHES MAXIMUM | THICKNESS | 0.0175 INCHES MINIMUM AND 0.0185 INCHES MAXIMUM |
|
|