5310-01-104-1087, WASHER,LOCK

National Stock Number:
5310-01-104-1087

Federal Supply Class:
5310

National Item Identification Number:
011041087

Description:
WASHER,LOCK

Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces

Manufacturer Information:

210-0021-00	80009	TEKTRONIX, INC.
FF-W-100	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS35333-126	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL
DEPARTURE FROM CITED DOCUMENT	AS MODIFIED BY SURFACE TREATMENT
HARDNESS RATING	40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
HOLE DIAMETER	0.472 INCHES MINIMUM AND 0.480 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL THICKNESS	0.013 INCHES MINIMUM AND 0.023 INCHES MAXIMUM
MATERIAL	STEEL COMP 1050 OVERALL OR STEEL COMP 1551 OVERALL OR STEEL COMP 1552 OVERALL OR STEEL COMP 1053 OVERALL OR STEEL COMP 1054 OVERALL OR STEEL COMP 1055 OVERALL OR STEEL COMP 1059 OVERALL OR STEEL COMP 1060 OVERALL OR STEEL COMP 1561 OVERALL OR STEEL COMP 1062 OVERALL OR STEEL COMP 1064 OVERALL
PROPRIETARY CHARACTERISTICS	PACS
NONDEFINITIVE SPEC/STD DATA	1 TYPE AND A GRADE AND 1 STYLE AND 1 COMPOSITION
OUTSIDE DIAMETER	0.593 INCHES MINIMUM AND 0.607 INCHES MAXIMUM
STYLE DESIGNATOR	FLAT INTERNAL TEETH

Click here to Register for Free 30-day Trial