5310-01-103-1782, WASHER,FLAT

National Stock Number:
5310-01-103-1782

Federal Supply Class:
5310

National Item Identification Number:
011031782

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

FF-W-92	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51867-S8	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.401 INCHES MINIMUM AND 0.421 INCHES MAXIMUM
LENGTH	1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OVERALL
NONDEFINITIVE SPEC/STD DATA	B TYPE AND 1 GRADE AND A CLASS
PERIPHERAL SHAPE STYLE	RECTANGULAR
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT
THICKNESS	0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
WIDTH ACROSS FLATS	0.797 INCHES MINIMUM AND 0.827 INCHES MAXIMUM

Click here to Register for Free 30-day Trial