|
|
|
National Stock Number:
5310-01-102-7365
Federal Supply Class:
5310
National Item Identification Number:
011027365
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 608-6395-001 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| BOSS DIAMETER | 0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED | | BOSS THICKNESS | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED | | COUNTERBORE DIAMETER | 0.154 INCHES MINIMUM AND 0.158 INCHES MAXIMUM BOSS | | CROSS-SECTIONAL SHAPE | ROUND FLANGE | | CROSS-SECTIONAL SHAPE | ROUND BOSS | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD SIZE | 0.112 INCHES | | NUT DIAMETER | 0.242 INCHES MINIMUM AND 0.258 INCHES MAXIMUM | | NUT COUNTERBORE DEPTH | 0.075 INCHES MINIMUM AND 0.105 INCHES MAXIMUM BOSS | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.099 INCHES MINIMUM AND 0.115 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 580-0025-000,FSCM 13499 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 40 | | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
|
|