|
|
|
National Stock Number:
5310-01-101-1856
Federal Supply Class:
5310
National Item Identification Number:
011011856
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| MS21299-C6 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | MS21299C6 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS21299C6 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE AND | | MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND | | 45.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.376 INCHES MINIMUM AND | | 0.380 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.702 INCHES MINIMUM AND | | 0.712 INCHES MAXIMUM | | RECESS DIAMETER | 0.497 INCHES MINIMUM AND | | 0.507 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.071 INCHES MINIMUM AND | | 0.085 INCHES MAXIMUM | | RECESS ANGLE | 90.0 DEGREES NOMINAL |
|
|