|
|
|
National Stock Number:
5310-01-100-0632
Federal Supply Class:
5310
National Item Identification Number:
011000632
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 32582 | 99643 | EATON AEROSPACE LLC | | 32582CP | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 52660-300 ITEM NO. 20CP | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 52660-300 ITEM NO. 20 | 99643 | EATON AEROSPACE LLC |
|
Techincal Specification:
| MATERIAL | PLASTIC OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS36518 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.242 INCHES MINIMUM AND | | 0.244 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.348 INCHES MINIMUM AND | | 0.350 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.048 INCHES MINIMUM AND | | 0.052 INCHES MAXIMUM | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D | | CRITICALITY CODE JUSTIFICATION | ZZZY | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 99643 | | DESIGN CONTROL REFERENCE | 32582 |
|
|