|
|
|
National Stock Number:
5310-01-098-1281
Federal Supply Class:
5310
National Item Identification Number:
010981281
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| A10810-1 | 28652 | MOOG INC WESTERN DEVELOPMENT CENTER | | A10810-1 | 94697 | MOOG INC | | A10810-1 | 9P5N5 | MOOG MILITARY AIRCRAFT LLC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL THREADS | | CROSS-SECTIONAL SHAPE | ROUND FLANGE | | FLANGE DIAMETER | 0.295 INCHES NOMINAL | | FLANGE THICKNESS | 0.101 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9,7075-T6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/9,T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY OVERALL | | NOMINAL THREAD SIZE | 0.112 INCHES | | NUT DIAMETER | 0.185 INCHES NOMINAL | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.149 INCHES NOMINAL | | SPECIAL FEATURES | 0.062 IN. THK BY 0.295 IN. DIA FLANGE ON OPPOSITE THD END | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED | | THREAD QUANTITY PER INCH | 40 | | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
|
|