|
|
|
National Stock Number:
5310-01-097-7691
Federal Supply Class:
5310
National Item Identification Number:
010977691
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 656-B34-1Y | 94223 | SPAENAUR INC DBA SPAENAUR INC. | | 768 | 94223 | SPAENAUR INC DBA SPAENAUR INC. | | PHC6-4F | 78357 | PARKER-HANNIFIN CORPORATION | | 849257-2 | 98749 | SACRAMENTO AIR LOGISTICS CENTER SM-ALC/LIIL |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-Z-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.344 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.250 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.051 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | SPECIAL FEATURES | LOW CARBON STEEL PER FED-STD-66 |
|
|