|
|
|
National Stock Number:
5310-01-094-6067
Federal Supply Class:
5310
National Item Identification Number:
010946067
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 881-7-1 | 21355 | LTA/D-CEMCO INC DBA D-CEMCO | | B1822-7-1 | 21355 | LTA/D-CEMCO INC DBA D-CEMCO | | B881-7-1 | 21355 | LTA/D-CEMCO INC DBA D-CEMCO |
|
Techincal Specification:
| THREAD SERIES | UNC | | NOMINAL THREAD SIZE | 0.085 INCHES | | THREAD QUANTITY PER INCH | 56 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | COPPER ALLOY 360 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,HALF HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CHROMATE AND | | SILVER OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365,TY 3,GRADE A FED SPEC ALL TREATMENT RESPONSES OVERALL | | NUT STYLE | SLEEVE | | NUT DIAMETER | 0.156 INCHES NOMINAL | | NUT LENGTH | 0.188 INCHES NOMINAL | | BOSS DIAMETER | 0.127 INCHES NOMINAL | | BOSS THICKNESS | 0.075 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE | ROUND OVERALL | | PRECIOUS MATERIAL | SILVER | | PRECIOUS MATERIAL AND LOCATION | OVERALL SILVER | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 21355 | | DESIGN CONTROL REFERENCE | B1822-7-1 |
|
|