|
|
|
National Stock Number:
5310-01-094-2894
Federal Supply Class:
5310
National Item Identification Number:
010942894
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 135B5661-3 | 05606 | GENERAL DYNAMICS-OTS, INC. | | 135B5661-3 | 1GUP7 | VERMONT AEROSPACE INDUSTRIES, LLC | | 135B5661-3 | 2W245 | BI-TEC INDUSTRIES INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232,TY M,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OR | | DOD-P-16232,TY Z,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 35.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.196 INCHES MINIMUM AND | | 0.209 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.790 INCHES MINIMUM AND | | 0.810 INCHES MAXIMUM | | RECESS DIAMETER | 0.392 INCHES MINIMUM AND | | 0.402 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.090 INCHES NOMINAL | | RECESS ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | HEAT TREATMENT | QUENCHED AND | | TEMPERED |
|
|