|
|
|
National Stock Number:
5310-01-094-2892
Federal Supply Class:
5310
National Item Identification Number:
010942892
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 4674147 ITEM 3 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 708-4674147 ITEM 3 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL | PLASTIC ACETAL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 150 (DELRIN),FSCM 27280 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 2.501 INCHES MINIMUM AND | | 2.510 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 5.000 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.750 INCHES NOMINAL | | OUTSIDE LEFT CORNER CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | OUTSIDE RIGHT CORNER CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES TOP | | 63.0 MICROINCHES BOTTOM | | 63.0 MICROINCHES INNER | | SPECIAL FEATURES | CHAMFER 0.100 IN. OUT SIDE EDGE BOTH SIDES |
|
|