5310-01-088-2830, WASHER,FLAT

5310-01-088-2829 NUT,SELF-LOCKING,CLINCH

National Stock Number:
5310-01-088-2830

Federal Supply Class:
5310

National Item Identification Number:
010882830

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

LS5984D-04L

98897

LOCKHEED MARTIN CORP

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.119 INCHES MINIMUM AND 0.129 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 2024 OVERALL
OVERALL DIAMETER	0.201 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE	ROUND
SPECIAL FEATURES	DESIGNED FOR TEMPERATURE LIMIT 200.0 DEG F
SPECIFICATION/STANDARD DATA	36659-LS5984 MANUFACTURERS STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT
THICKNESS	0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM

Click here to Register for Free 30-day Trial