|
|
|
National Stock Number:
5310-01-084-7066
Federal Supply Class:
5310
National Item Identification Number:
010847066
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 8226970 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.875 INCHES | | THREAD QUANTITY PER INCH | 14 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | COPPER ALLOY OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMP22 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE COPPER OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171C MIL STD SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | SLEEVE | | FLANGE DIAMETER | 1.188 INCHES NOMINAL | | FLANGE THICKNESS | 0.062 INCHES NOMINAL | | NUT DIAMETER | 1.040 INCHES MINIMUM AND | | 1.050 INCHES MAXIMUM | | NUT LENGTH | 0.406 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE | ROUND OVERALL | | SPECIAL FEATURES | FLANGED END CONTAINS SAW SLOT,0.062 WIDE; 0.060 PLUS 0.010 DEEP | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19200 | | DESIGN CONTROL REFERENCE | 8226970 |
|
|