|
|
|
National Stock Number:
5310-01-082-2060
Federal Supply Class:
5310
National Item Identification Number:
010822060
Description:
NUT,SELF-LOCKING,HEXAGON
Detail:
A nut having a flat bottom and 6 sides. An integral feature is incorporated for locking on the threads of a mating member. Excludes NUT (1), SELF-LOCKING, CAP.
|
Manufacturer Information:
| 0740690 | S3002 | GENERAL DYNAMICS EUROPEAN LAND SYSTEMS - MOWAG GMBH | | 79NE074U | 019L2 | ESNA, LLC | | A07058.003.156 | 01343 | ANDERSON GREENWOOD LP DBA ANDERSON GREENWOOD CROSBY | | 803-5001003-X7X1-06 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 79NE074U | 72962 | HARVARD INDUSTRIES INC | | MS17830-7C | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | SW102-11 | 01343 | ANDERSON GREENWOOD LP DBA ANDERSON GREENWOOD CROSBY | | MS17830-7C | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS17830-7C | A3121 | FINCANTIERI CANTIERI NAVALI ITALIANI SPA | | MS17830-7C | A3460 | GE AVIO S.R.L. |
|
Techincal Specification:
| THREAD DIRECTION | RIGHT-HAND | | MATERIAL | PLASTIC POLYHEXAMETHYLENE AMIDE LOCKING INSERT | | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 302B OR | | STEEL COMP 303 OR | | STEEL COMP 303SE OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 308 OR | | STEEL COMP 309 OR | | STEEL COMP 309S OR | | STEEL COMP 310 OR | | STEEL COMP 310S OR | | STEEL COMP 314 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 348 OR | | STEEL COMP 384 OR | | STEEL COMP 385 NUT | | NUT STYLE | HEXAGON | | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT | | BEARING SURFACE TYPE | CHAMFERED | | THREAD SERIES | UNC | | NOMINAL THREAD SIZE | 0.438 INCHES | | THREAD QUANTITY PER INCH | 14 | | THREAD CLASS | 3B | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-20693,COMP A,TYPE 1 MIL SPEC SINGLE MATERIAL RESPONSE LOCKING INSERT | | 66 FED STD ALL MATERIAL RESPONSES NUT | | SURFACE TREATMENT | PASSIVATE NUT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE NUT | | NUT HEIGHT | 0.435 INCHES MINIMUM AND | | 0.469 INCHES MAXIMUM | | WIDTH ACROSS FLATS | 0.679 INCHES MINIMUM AND | | 0.690 INCHES MAXIMUM | | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM NUT | | TEMP RATING | 250.0 DEG FAHRENHEIT MAXIMUM |
|
|