|
|
|
National Stock Number:
5310-01-077-8671
Federal Supply Class:
5310
National Item Identification Number:
010778671
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| FF-W-84 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35338-156B | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM35338-156B | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 420 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE FILM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND | | 53.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND | | HOLE DIAMETER | 0.168 INCHES MINIMUM AND | | 0.175 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.293 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.040 INCHES MINIMUM AND | | 0.046 INCHES MAXIMUM | | NONDEFINITIVE SPEC/STD DATA | B CLASS AND | | 2 STYLE |
|