5310-01-072-2900, WASHER,FLAT

National Stock Number:
5310-01-072-2900

Federal Supply Class:
5310

National Item Identification Number:
010722900

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

FF-W-92	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS15795-724	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS15795-724	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.931 INCHES MINIMUM AND 0.968 INCHES MAXIMUM
OVERALL DIAMETER	1.743 INCHES MINIMUM AND 1.780 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5 TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 2024 OVERALL
NONDEFINITIVE SPEC/STD DATA	A TYPE AND 1 GRADE AND D CLASS
PERIPHERAL SHAPE STYLE	ROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 TY 1 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-A-8625 TY 2 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ANODIZE OVERALL
THICKNESS	0.108 INCHES MINIMUM AND 0.160 INCHES MAXIMUM

Click here to Register for Free 30-day Trial