5310-01-068-4602, WASHER,FLAT

National Stock Number:
5310-01-068-4602

Federal Supply Class:
5310

National Item Identification Number:
010684602

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

NAS1401-3-3

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

MATERIAL	STEEL COMP 1008 OR
	STEEL COMP 1009 OR
	STEEL COMP 1015 OR
	STEEL COMP 1018 OR
	STEEL COMP 1020 OR
	STEEL COMP 1025 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-698,TEMPER 1/2 HARD FED SPEC 1ST MATERIAL RESPONSE OR
	QQ-S-698,TEMPER HARD FED SPEC 1ST MATERIAL RESPONSE OR
	QQ-S-698,TEMPER 1/2 HARD FED SPEC 2ND MATERIAL RESPONSE OR
	QQ-S-698,TEMPER HARD FED SPEC 2ND MATERIAL RESPONSE OR
	QQ-S-698,TEMPER 1/2 HARD FED SPEC 3RD MATERIAL RESPONSE OR
	QQ-S-698,TEMPER HARD FED SPEC 3RD MATERIAL RESPONSE OR
	QQ-S-698,TEMPER 1/2 HARD FED SPEC 4TH MATERIAL RESPONSE OR
	QQ-S-698,TEMPER HARD FED SPEC 4TH MATERIAL RESPONSE OR
	QQ-S-698,TEMPER 1/2 HARD FED SPEC 5TH MATERIAL RESPONSE OR
	QQ-S-698,TEMPER HARD FED SPEC 5TH MATERIAL RESPONSE OR
	MIL-S-7952 MIL SPEC 5TH MATERIAL RESPONSE OR
	MIL-S-7952 MIL SPEC 6TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND
	CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER HOLE SHAPE STYLE	ROUND
HOLE DIAMETER	0.193 INCHES MINIMUM AND
	0.213 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE	SQUARE
WIDTH ACROSS FLATS	0.430 INCHES MINIMUM AND
	0.490 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
THICKNESS	0.090 INCHES NOMINAL
SPECIAL FEATURES	0.060 IN. RADIUS ALL CORNERS,0.090 IN. RADIUS ONE SIDE
SPECIFICATION/STANDARD DATA	80205-NAS1401 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

Click here to Register for Free 30-day Trial