|
|
|
National Stock Number:
5310-01-065-5948
Federal Supply Class:
5310
National Item Identification Number:
010655948
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 715010 | 08752 | PARKER-HANNIFIN CORP FLUIDPOWER GROUP MOBILE HYDRAULICS DIV | | 715010 | 09990 | PARKER-HANNIFIN CORPORATION | | L33763 | 10988 | CNH INDUSTRIAL AMERICA LLC | | 715010 | 45681 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1212 OR | | STEEL COMP 1215 OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.445 INCHES MINIMUM AND | | 0.450 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.594 INCHES MINIMUM AND | | 1.599 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.185 INCHES MINIMUM AND | | 0.195 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES TOP | | 32.0 MICROINCHES BOTTOM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 45681 | | DESIGN CONTROL REFERENCE | 715010 |
|
|