5310-01-064-3621, WASHER,FLAT

5310-01-064-3620 NUT,SELF-LOCKING,EXTENDED WASHER

National Stock Number:
5310-01-064-3621

Federal Supply Class:
5310

National Item Identification Number:
010643621

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

6U33C-03	0ZLV2	GSE PRODUCTION AND SUPPORT LLC
6U33C-03	98296	STANDARD MFG CO INC
AN960XC1216	81352	AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP
FF-W-92	88044	AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE

Techincal Specification:

MATERIAL	STEEL COMP 301 OR
	STEEL COMP 302 OR
	STEEL COMP 316 OR
	STEEL COMP 321 OR
	STEEL COMP 347 OR
	STEEL COMP 348 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR
	MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OR
	MIL-S-5059 MIL SPEC 3RD MATERIAL RESPONSE OR
	MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OR
	MIL-S-6721 MIL SPEC 5TH MATERIAL RESPONSE OR
	MIL-S-6721 MIL SPEC 6TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER HOLE SHAPE STYLE	ROUND
HOLE DIAMETER	0.755 INCHES MINIMUM AND
	0.775 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE	ROUND
OVERALL DIAMETER	1.307 INCHES MINIMUM AND
	1.332 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
THICKNESS	0.080 INCHES MINIMUM AND
	0.100 INCHES MAXIMUM
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	81352
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	AN960XC1216
MANUFACTURERS CODE	88044
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	FF-W-92

Click here to Register for Free 30-day Trial