|
|
|
National Stock Number:
5310-01-060-1011
Federal Supply Class:
5310
National Item Identification Number:
010601011
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 2006013-3 | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 2006013-3 | 4JZH8 | ES3 PRIME LOGISTICS GROUP INC | | 2006013-3 | 6K4C8 | GOODRICH CORPORATION | | 2006013-3 | 6Z056 | CM MANUFACTURING INC | | 2006013-3 | 93953 | MELSTROM MANUFACTURING CORPORATION | | 2006013-3 | H1632 | GKN FOKKER AEROSPACE B.V. | | 5310PL0748599 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| THREAD SERIES | UNJ | | NOMINAL THREAD SIZE | 2.000 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 4130 OR | | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | SLEEVE | | FLANGE THICKNESS | 0.190 INCHES NOMINAL | | NUT DIAMETER | 2.300 INCHES NOMINAL | | NUT LENGTH | 1.810 INCHES NOMINAL | | FLANGE WIDTH ACROSS FLATS | 2.470 INCHES MINIMUM AND | | 2.510 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE | ROUND NUT | | HEXAGONAL FLANGE | | SPECIAL FEATURES | SIX EQUALLY SPACED SLOTS 0.266 IN. WIDE AND 0.550 IN. DEEP | | CRITICALITY CODE JUSTIFICATION | SUPP | | SUPPLEMENTARY FEATURES | ITEM IS NOT CSI BUT HAS CRITICAL FEATURE SUCH AS HEAT TREATMENT,SURFACE FINISH,OR MATERIAL TYPE AND SPECIAL INSPECTION REQUIREMENTS SUCH AS MAGNETIC PARTICLE INSPECTION OR FLUORESCENT PENETRANT INSPECTION | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 17576 | | DESIGN CONTROL REFERENCE | 2006013-3 |
|
|