|
|
|
National Stock Number:
5310-01-050-6565
Federal Supply Class:
5310
National Item Identification Number:
010506565
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10510003 | 56161 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION | | 2HL945 | 45152 | OSHKOSH CORP | | 2HL945 | 75Q65 | OSHKOSH DEFENSE LLC | | G18-99 | 76761 | C E NIEHOFF & CO | | N9063 | 76761 | C E NIEHOFF & CO | | 5310PL0705746 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1050 OR | | STEEL COMP 1551 OR | | STEEL COMP 1552 OR | | STEEL COMP 1053 OR | | STEEL COMP 1054 OR | | STEEL COMP 1055 OR | | STEEL COMP 1059 OR | | STEEL COMP 1060 OR | | STEEL COMP 1561 OR | | STEEL COMP 1064 OR | | STEEL COMP 1065 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | OXIDE FILM OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.530 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.060 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.090 INCHES NOMINAL | | COLOR | BLACK OVERALL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 76761 | | DESIGN CONTROL REFERENCE | N9063 |
|
|