5310-01-050-5018, WASHER,FLAT

National Stock Number:
5310-01-050-5018

Federal Supply Class:
5310

National Item Identification Number:
010505018

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

AN960XC2016	81352	AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP
AN960XC2016	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
FF-W-92	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

SURFACE TREATMENT	OXIDE FILM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER HOLE SHAPE STYLE	ROUND
HOLE DIAMETER	1.255 INCHES MINIMUM AND
	1.275 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE	ROUND
OVERALL DIAMETER	1.995 INCHES MINIMUM AND
	2.020 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
THICKNESS	0.080 INCHES MINIMUM AND
	0.100 INCHES MAXIMUM
NONDEFINITIVE SPEC/STD DATA	A TYPE AND
	2 GRADE
DEPARTURE FROM CITED DOCUMENT	AS MODIFIED BY MATERIAL
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	81352
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	AN960XC2016
MANUFACTURERS CODE	81348
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	FF-W-92
MATERIAL	STEEL COMP 301 OR
	STEEL COMP 302 OR
	STEEL COMP 316 OR
	STEEL COMP 321 OR
	STEEL COMP 347 OR
	STEEL COMP 348 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR
	MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OR
	MIL-S-5059 MIL SPEC 3RD MATERIAL RESPONSE OR
	MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OR
	MIL-S-6721 MIL SPEC 5TH MATERIAL RESPONSE OR
	MIL-S-6721 MIL SPEC 6TH MATERIAL RESPONSE OVERALL

Click here to Register for Free 30-day Trial