|
|
|
National Stock Number:
5310-01-037-8933
Federal Supply Class:
5310
National Item Identification Number:
010378933
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 12007696 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 3.375 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 1020 OR | | STEEL COMP 1045 OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.250 INCHES NOMINAL | | NUT DIAMETER | 3.970 INCHES MINIMUM AND | | 4.030 INCHES MAXIMUM | | NUT THICKNESS | 0.500 INCHES NOMINAL | | DRIVE POINT WIDTH | 0.380 INCHES MINIMUM AND | | 0.400 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 4 | | SPECIAL FEATURES | FOUR 0.400 INCH WIDE WRENCHING ACCOMODATION EQUALLY SPACED ON OPPOSITE SIDE BEARING SURFACE,ONE 0.062 IN DIA HOLE ANGLED 45 DEGREES LOCATED 30 DEGREES FROM 0.250 DIA HOLE ON PERIPHERY OF NUT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19204 | | DESIGN CONTROL REFERENCE | 12007696 |
|
|