|
|
|
National Stock Number:
5310-01-014-8948
Federal Supply Class:
5310
National Item Identification Number:
010148948
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| A318F001-001 | 88818 | KEARFOTT CORPORATION | | A318F001-101 | 88818 | KEARFOTT CORPORATION |
|
Techincal Specification:
| THREAD SERIES | UNEF | | NOMINAL THREAD SIZE | 0.250 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | ROUND | | NUT DIAMETER | 0.732 INCHES MINIMUM AND | | 0.738 INCHES MAXIMUM | | NUT THICKNESS | 0.120 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | WIDTH ACROSS FLATS | 0.455 INCHES MINIMUM AND | | 0.465 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 1 TAPPED | | HOLE NOMINAL THREAD DIAMETER | 0.112 INCHES | | HOLE THREAD QUANTITY PER INCH | 40 | | SPECIAL FEATURES | ONE 0.045 IN. W SLOT CONCENTRIC TO HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 88818 | | DESIGN CONTROL REFERENCE | A318F001-101 |
|
|