|
|
|
National Stock Number:
5310-01-005-3197
Federal Supply Class:
5310
National Item Identification Number:
010053197
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| S8154-147C015 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 1/4 H,1/2 H OR FULL HARD MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-5059,1/4 H MIL SPEC 2ND MATERIAL RESPONSE OR | | ASTM A582 ASSN STD 3RD MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.073 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.140 INCHES MINIMUM AND | | 0.150 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.015 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES TOP | | 63.0 MICROINCHES BOTTOM | | SPECIFICATION/STANDARD DATA | 70210-S8154 MANUFACTURERS STANDARD |
|
|