|
|
|
National Stock Number:
5310-00-995-6074
Federal Supply Class:
5310
National Item Identification Number:
009956074
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 215-72439-1 | 80378 | TRIUMPH AEROSTRUCTURES, LLC |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 COND C-4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND | | 43.0 ROCKWELL C MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.120 INCHES NOMINAL | | BOSS DIAMETER | 0.362 INCHES MINIMUM AND | | 0.373 INCHES MAXIMUM | | BOSS THICKNESS | 0.110 INCHES NOMINAL | | NUT WIDTH ACROSS FLATS | 0.937 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 3 DRILLED | | DRILLED HOLE DIAMETER | 0.052 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE | HEXAGONAL NUT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80378 | | DESIGN CONTROL REFERENCE | 215-72439-1 |
|
|