| LOCKING FEATURE | PREVAILING TORQUE WITH METALLIC INSERT |
| THREAD DIRECTION | RIGHT-HAND |
| NUT STYLE | PLATE |
| MATERIAL | ALUMINUM ALLOY 2014 NUT |
| THREAD SERIES | UNC |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 2B |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 7245 ASSN STD SINGLE MATERIAL RESPONSE LOCKING INSERT |
| SURFACE TREATMENT | OXIDE FILM NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| NUT LENGTH | 2.410 INCHES MINIMUM AND |
| 2.510 INCHES MAXIMUM |
| DISTANCE FROM BASE TO CENTER OF APERTURE | 0.290 INCHES MINIMUM AND |
| 0.330 INCHES MAXIMUM |
| NUT HEIGHT | 1.810 INCHES MINIMUM AND |
| 1.870 INCHES MAXIMUM |
| PLATE THICKNESS | 0.040 INCHES MINIMUM AND |
| 0.060 INCHES MAXIMUM |
| PLATE WIDTH | 1.460 INCHES MINIMUM AND |
| 1.570 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| MOUNTING HOLE ARRANGEMENT STYLE | 3 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND |
| 0.103 INCHES MAXIMUM |
| DISTANCE FROM MOUNTING HOLE CENTER TO BASE | 0.230 INCHES MINIMUM AND |
| 0.270 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 0.100 INCHES MINIMUM AND |
| 0.103 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.540 INCHES MINIMUM AND |
| 0.580 INCHES MAXIMUM |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 04169 |
| DESIGN CONTROL REFERENCE | WSI313-14 |