|
|
|
National Stock Number:
5310-00-945-0528
Federal Supply Class:
5310
National Item Identification Number:
009450528
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10121865 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 2-805-008-375 | 63097 | VIKING PUMP, INC | | 301250 | 21119 | EVINRUDE MOTORS PRODUCT GROUP OF OUTBOARD MARINE CORP | | 236-1170P15 | 3B150 | RAYTHEON COMPANY | | 236-1170P15 | 49956 | RAYTHEON COMPANY | | 5310009450528 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | N400P42 | 07482 | GENERAL ELECTRIC COMPANY | | MS9321-11 | 0U583 | SAE INTERNATIONAL | | MS9321-11 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | 5310PL0211511 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | MS9321-11 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 968.20.13.246 | S4080 | PILATUS AIRCRAFT LTD | | 9682013246 | S4080 | PILATUS AIRCRAFT LTD | | 5310009450528 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 321 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.333 INCHES MINIMUM AND | | 0.343 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.625 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.062 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES TOP | | 63.0 MICROINCHES BOTTOM |
|
|