| 1.030 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 81205-BACN10GH MANUFACTURERS STANDARD |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 77272 |
| DESIGN CONTROL REFERENCE | BACN10GH3-26 |
| LOCKING FEATURE | PREVAILING TORQUE WITH METALLIC INSERT |
| THREAD DIRECTION | RIGHT-HAND |
| NUT STYLE | PLATE |
| MATERIAL | STEEL LOCKING INSERT |
| ALUMINUM ALLOY 2014 SHELL |
| THREAD SERIES | UNF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 2B |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/3,T6 FED SPEC SINGLE MATERIAL RESPONSE SHELL |
| SURFACE TREATMENT | ANODIZE OR |
| OXIDE FILM SHELL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR |
| MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE SHELL |
| NUT LENGTH | 3.080 INCHES MINIMUM AND |
| 3.120 INCHES MAXIMUM |
| DISTANCE FROM BASE TO CENTER OF APERTURE | 0.290 INCHES MINIMUM AND |
| 0.330 INCHES MAXIMUM |
| NUT HEIGHT | 3.020 INCHES MINIMUM AND |
| 3.060 INCHES MAXIMUM |
| PLATE THICKNESS | 0.040 INCHES MINIMUM AND |
| 0.060 INCHES MAXIMUM |
| PLATE WIDTH | 1.500 INCHES NOMINAL |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND |
| 0.103 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.500 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.000 INCHES MINIMUM AND |