|
|
|
National Stock Number:
5310-00-926-5871
Federal Supply Class:
5310
National Item Identification Number:
009265871
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 004-003005-028 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | D301079 FIND N0 65 | 3X894 | CONTROL FLOW, INC. | | D301079 FIND NO 65 | 3X894 | CONTROL FLOW, INC. | | D301080 FIND N0 56 | 3X894 | CONTROL FLOW, INC. | | D301080 FIND NO 56 | 3X894 | CONTROL FLOW, INC. | | D301087 FIND N0 65 | 3X894 | CONTROL FLOW, INC. | | D301087 FIND NO 65 | 3X894 | CONTROL FLOW, INC. | | MS35338-147 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS35338-147 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS35338-90 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| MATERIAL | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 303 OR | | STEEL COMP 303SE OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 308 OR | | STEEL COMP 309 OR | | STEEL COMP 309S OR | | STEEL COMP 310 OR | | STEEL COMP 310S OR | | STEEL COMP 314 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 348 OR | | STEEL COMP 385 OR | | STEEL COMP 384 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND | | 43.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND | | HOLE DIAMETER | 0.890 INCHES MINIMUM AND | | 0.912 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.464 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.219 INCHES MINIMUM AND | | 0.239 INCHES MAXIMUM | | NONDEFINITIVE SPEC/STD DATA | 2 STYLE AND | | C CLASS |
|
|