|
|
|
National Stock Number:
5310-00-923-3848
Federal Supply Class:
5310
National Item Identification Number:
009233848
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 6823170 | 63005 | ROLLS-ROYCE CORPORATION | | 6823170 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM | | HEAT TREATMENT | AS FABRICATED | | HOLE DIAMETER | 0.255 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OVERALL DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD 1ST MATERIAL RESPONSE AND AMS 6355 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OR STEEL COMP 8630 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS2485 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE FILM OVERALL | | THICKNESS | 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
|
|