|
|
|
National Stock Number:
5310-00-921-5126
Federal Supply Class:
5310
National Item Identification Number:
009215126
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 5310009215126 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 65B9973 | 18894 | AIR ARMAMENT CENTER/ EN | | 65B9973 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| THREAD SERIES | UNJF | | NOMINAL THREAD SIZE | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | PLASTIC POLYAMIDE LOCKING INSERT | | STEEL CORROSION RESISTING NUT | | SURFACE TREATMENT | PASSIVATE NUT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 171,FIN. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE NUT | | NUT STYLE | SLEEVE | | FLANGE THICKNESS | 0.110 INCHES NOMINAL | | NUT DIAMETER | 0.426 INCHES MINIMUM AND | | 0.436 INCHES MAXIMUM | | NUT LENGTH | 0.110 INCHES NOMINAL | | FLANGE WIDTH ACROSS FLATS | 0.430 INCHES MINIMUM AND | | 0.439 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE | ROUND NUT | | HEXAGONAL FLANGE |
|
|