|
|
|
National Stock Number:
5310-00-919-0599
Federal Supply Class:
5310
National Item Identification Number:
009190599
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 3002T33P01 | 24446 | GENERAL ELECTRIC COMPANY | | 3002T33P01 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| THREAD SERIES | UNEF | | NOMINAL THREAD SIZE | 0.9375 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6381 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 6382 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2485 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 36.0 ROCKWELL C MAXIMUM | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.125 INCHES NOMINAL | | NUT DIAMETER | 1.500 INCHES MINIMUM AND | | 1.520 INCHES MAXIMUM | | NUT THICKNESS | 0.330 INCHES MINIMUM AND | | 0.335 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.120 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 15 | | NUT COUNTERBORE DEPTH | 0.135 INCHES NOMINAL SECOND END | | COUNTERBORE DIAMETER | 1.330 INCHES MINIMUM AND | | 1.340 INCHES MAXIMUM SECOND END | | COUNTERSINK ANGLE | 118.0 DEGREES MINIMUM AND | | 122.0 DEGREES MAXIMUM BOTH ENDS | | SPECIAL FEATURES | INSIDE GROOVE,1.391 IN. MIN,1.399 IN. MAX ID,CBORE END | | TEST DATA DOCUMENT | 99207-P3-TE2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | BEARING SURFACE FINISH | 32.0 MICROINCHES |
|
|