|
|
|
National Stock Number:
5310-00-918-7415
Federal Supply Class:
5310
National Item Identification Number:
009187415
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 65C9806 | 18894 | AIR ARMAMENT CENTER/ EN | | 65C9806 | 19200 | US ARMY ARDEC RDECOM | | 65C9806 | 19205 | SPRINGFIELD ARMORY | | 65C9806 | 80049 | DEPARTMENT OF THE AIR FORCE |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 1.500 INCHES | | THREAD QUANTITY PER INCH | 12 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 4140 OR | | STEEL COMP 4340 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 35.0 ROCKWELL C MAXIMUM | | NUT STYLE | SLEEVE | | FLANGE DIAMETER | 2.908 INCHES MINIMUM AND | | 3.000 INCHES MAXIMUM | | NUT DIAMETER | 2.2514 INCHES MINIMUM AND | | 2.2516 INCHES MAXIMUM | | NUT LENGTH | 2.050 INCHES MINIMUM AND | | 2.060 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 4 DRILLED | | DRILLED HOLE DIAMETER | 0.218 INCHES MINIMUM AND | | 0.231 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE | ROUND W/WRENCH FLATS OVERALL | | SPECIAL FEATURES | 15-35 PCT LEAD PERMITTED IN MATERIAL,HEAT TREAT PER MIL-H-6875 | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 18894 | | DESIGN CONTROL REFERENCE | 65C9806 |
|
|