|
|
|
National Stock Number:
5310-00-916-8079
Federal Supply Class:
5310
National Item Identification Number:
009168079
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 40A574 | 19156 | MOOG INC | | 40A574 | 79294 | E-SYSTEMS INC MONTEK DIV FLUID CONTROLS OPNS | | 40A574 | 94697 | MOOG INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,TYPE 302 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | WPS 10012,FSCN 79294 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.380 INCHES MINIMUM AND | | 0.390 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.545 INCHES MINIMUM AND | | 0.555 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.017 INCHES MINIMUM AND | | 0.023 INCHES MAXIMUM | | HEAT TREATMENT | COLD DRAWN 1/4 HARD CONDITION | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 94697 | | DESIGN CONTROL REFERENCE | 40A574 |
|
|