|
|
|
National Stock Number:
5310-00-912-6120
Federal Supply Class:
5310
National Item Identification Number:
009126120
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 64127W6 | 56878 | SPS TECHNOLOGIES, LLC | | 7611-06 | 019L2 | ESNA, LLC | | K28-6 | 15653 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 7611-06 | 72962 | HARVARD INDUSTRIES INC | | C396-6B | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8740 OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND | | 46.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.531 INCHES MINIMUM AND | | 0.537 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.780 INCHES MINIMUM AND | | 0.790 INCHES MAXIMUM | | RECESS DIAMETER | 0.640 INCHES MINIMUM AND | | 0.650 INCHES MAXIMUM | | RECESS DEPTH | 0.104 INCHES NOMINAL | | MATERIAL THICKNESS | 0.170 INCHES MINIMUM AND | | 0.180 INCHES MAXIMUM | | RECESS ANGLE | 90.0 DEGREES NOMINAL |
|
|