|
|
|
National Stock Number:
5310-00-912-0658
Federal Supply Class:
5310
National Item Identification Number:
009120658
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 520844 | 5A628 | DELL MANUFACTURING CO., LLC | | 520844 | 77445 | RTX CORPORATION | | 520844 | 99106 | AMERICAN AIRCRAFT PARTS MFG. CO. |
|
Techincal Specification:
| THREAD SERIES | UNJS | | NOMINAL THREAD SIZE | 4.9375 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 8740 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OR | | AM 6323 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | SILVER OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2210 ASSN STD SINGLE TREATMENT RESPONSE OR | | AMS 2212 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.170 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | NUT DIAMETER | 5.572 INCHES MINIMUM AND | | 5.576 INCHES MAXIMUM | | NUT THICKNESS | 1.640 INCHES MINIMUM AND | | 1.660 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 10 | | HOLE CONFIGURATION STYLE | CONFIGURATION F | | HOLE TYPE AND QUANTITY | 18 TAPPED | | HOLE NOMINAL THREAD DIAMETER | 0.216 INCHES | | HOLE THREAD QUANTITY PER INCH | 28 | | NUT COUNTERBORE DEPTH | 0.110 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM BASE | | COUNTERBORE DIAMETER | 5.277 INCHES MINIMUM AND | | 5.283 INCHES MAXIMUM BASE | | COUNTERSINK ANGLE | 2.0 DEGREES MINIMUM AND | | 4.0 DEGREES MAXIMUM BASE | | SPECIAL FEATURES | 54 HOLES,0.084 IN. MIN 0.094 IN. MAX DIA,FROM BASE TO BOTTOM OF INSIDE GROOVE BEYOND THREADS; INSIDE DIAMETER 4.960 IN. MIN,4.970 IN. MAX,UNTHREADED PORTION; EXTERNAL GROOVE,0.050 IN. MIN,0.070 IN. MAX W; 5.390 IN. MIN,5.410 IN. MAX OD,DRIVE SIDE,AT END OF CHAMFER; 10 DRIVE SLOTS,0.490 IN. MIN,0.510 IN. MAX W; RADIAL HOLES CTR 0.275 IN. FM BASE; LONGITUDINAL HOLES IN GROUPS OF THREE |
|
|